GMV5 D.C INVERTER MULTI VRF SERVICE MANUAL
144
" " indicates that commissioning is not passed on the phase and troubleshooting is required
(after troubleshooting, the unit automatically enters the next step if no "OK" exists or click "OK" to enter
the next step). Click " " to display relevant information detected on this phase, which provides
references for troubleshooting. Click "Close" to close the information.
During commissioning, click "Stop" to stop commissioning and then click "Start" to continue
commissioning till commissioning ends. "Back" and "Skip" are provided in "10 ODU Valves Check
To Next Page
Loading...
Need help?
General