GMV5 D.C INVERTER MULTI VRF SERVICE MANUAL
145
Before Startup". When an exception occurs in step 10, click "Back" to return to step 9 and then click "OK"
in step 9 to perform commissioning again for step 10. If a U6 fault (valve exception) occurs in step 10,
users can click "Skip" to skip the fault. For other faults, "Skip" is unavailable.
Commissioning steps 11, 13, and 14 are reserved. Steps 13, 14, 15, and 16 are parallel steps (one
of the four steps will be selected according to the actual unit).
At last, engineering commissioning is completed when " " is displayed on "Project Debug
To Next Page
Loading...
Need help?
General