GMV5 D.C INVERTER MULTI VRF SERVICE MANUAL
160
Figure 2
If project commissioning is finished and the IDU where the conflict occurs needs to be set
separately. Click Project Number Conflict, as shown in Figure 3. The pop-up box comprises two parts:
conflicting IDU box, showing the IDU's project number, system number and time; setting box, showing
the IDU project number setting and setting button.
Figure 3
Choose one IDU in the conflicting IDU box shown in Figure 3 and click Set in the setting box.
Choose a value in the pop-up box shown in Figure 4 and click Set.
To Next Page
Loading...
