GMV5 D.C INVERTER MULTI VRF SERVICE MANUAL
162
Figure 5
If project commissioning is not finished and all the IDUs' project numbers need to be reset, click Set
All IDUs Project Number shown in Figure 2. As shown in Figure 6, the pop-up box comprises two parts:
Systems Selection, where you can choose the system to be reset; Settings box, where you can give the
resetting instruction.
Figure 6
Choose one or multiple systems in the Systems Selection box and click Set in the Settings box, as
shown in Figure 6. Click Set, as shown in Figure 7.
To Next Page
Loading...
