GMV5 D.C INVERTER MULTI VRF SERVICE MANUAL
223
Step 11: Install a new compressor.
If it is a inverter compressor that needs replacement
For compressors of GMV-120WM/B-F(U) unit, make sure the new compressors are consistent with
the faulty ones in model. If both compressors need replacement, make sure corresponding position and
1. Put the oil
separator on a
proper position
2. Weld the
connecting
pipes of the
oil separator
3. Screw the
oil separator
4. Weld the
oil return
components
1. Weld the
inlet of the
inverter
compressor
2. Weld the
outlet of the
inverter
compressor
To Next Page
Loading...
