14
Installation of Outdoor Unit
●
Precautions on Installation of Outdoor Unit
To ensure the unit in proper function, selection of installation location must be in accordance with following
principles:
Outdoor unit shall be installed so that the air discharged by outdoor unit will not return and that sufficient ☆
space for repair shall be provided around the machine.
Pla☆ ce of installation must be well ventilated so that the machine can absorb and discharge sufficient air.
Ensure the air inlet and outlet of the machine are not blocked. If blocked, please clear off the obstacles
blocking the air inlet or outlet.
Place of ☆ installation shall be strong enough to support the weight of outdoor unit, and it shall be able to
insulate noise and prevent vibration. Ensure that the wind and noise from the unit will not affect your
neighbors.
Outdoor unit must be lifted by using des☆ ignated lifting hole. Take care to protect the unit during lift. To
avoid rusting, do not knock the metal parts.
Try best to avoid direct sunshine.☆
Place of installation must be able to drain the rainwater and defrosting water.☆
Place of installation ☆ must ensure that the machine will not be buried under snow or subject to the
influence of rubbish or oil fog.
To meet the noise and vibration requirements, the outdoor unit shall be installed with rubber damper or ☆
spring damper.
☆
Installation dimension shall be in accordance with the installation requirements in this
manual. Outdoor unit must be securely fixed to the position.
The unit shall be installed by professional technicians.☆
● Installation of Outdoor Unit
1. Outline Dimension of GMV-Pdhm224W/Na-M、GMV-Pdhm280W/Na-M
To Next Page
Loading...
