214
DC Inverter Multi
VRF Service Manual
4. Remove the
liquid storage tank
● Adjust the connecting pipe to
pull out the liquid storage tank.
● Move out the liquid storage
tank. from the electric box.
5. Mount new liquid
storage tank
Weld the spots
● Weld the 2 connecting spots.
● Charge nitrogen for welding. The
pressure of nitrogen is 0.5±0.1kgf/
c (relative pressure).
Note: do not burn the other
parts during soldering.
6. Fix electric box
and wire xer,
● Move up the electric box and x it.
● Tighen the wire xer of
the right electric box.
7. Mount the
front panel
● Check if the parts and connecting
wires aire well connected.
● Fix the left and right front panels.
To Next Page
Loading...