GMV5 D.C INVERTER MULTI VRF SERVICE MANUAL
419
Communication between the server and BACnet gateway fails.
Communication between the BACnet gateway and units fails.
Solution:
(1) Check whether BAS Service is disabled. If yes, enable it.
There are two methods to enable BAS Service.
Method a
①
Right click the BAS Manager icon in the status bar at the lower right corner on the desktop and
choose ―Open‖.
②
In the displayed ―BAS Manager‖ window, click ―Start‖ to enable BAS Manager.
Method b
Choose ―Start‖ -> ―All Programs‖ -> ―Gree CAC Remote Monitoring System‖-> ―Service Manager‖.
In the displayed ―BAS Manager‖ window, click ―Start‖ to enable BAS Manager.
To Next Page
Loading...
