Gree GPAC12D

4
Name of control panel
ON/OFF button
Mode button
+ / - button
Dual-8 nixie tube
Fan mode indicator
Heat mode indicator
Cool&Heat Unit only
Cool mode indicator
Dry mode indicator
Sleep button
Fan button
Timer button
Fan speed indicator
Operation of control panel
NOTICE:
●
After putting through the power, the air conditioner will give out a sound. After
that, you can operate the air conditioner by the control panel.
●
Under ON status, after each pressing of the button on control panel, the air
conditioner will give out a sound. Meanwhile, corresponding indicator on control
panel will be bright.
●
Under OFF status, dual-8 nixie tube on control panel won’t display.
Under ON status, dual-8 nixie tube on control panel will display set temperature
under cooling mode and Heating mode (Cool&Heat Unit only), while it won’t display
under other modes.
Pressing this button can turn on or turn off the air conditioner.
ON/OFF button
+ / - button
1
2
Introduction for Control Panel
Health mode indicator(Optional)
Under cooling mode, press “+” or “-” button to increase or decrease set temperature by
1°C. Set temperature range is 16°C~30°C. Under auto, drying or fan mode, this
button is invalid.