Unit Control
[Notes]
：
● It can be performed only when the unit is turned off.
3.2.2.16 WiFi Reset
[Operation Instructions]
★
At the function setting page, by touching ―
WiFi
‖, a choice box will pop up, where by touching ―
OK
‖ , the
WiFi setting will be reset, and by touching ―
Cancel
‖ the choice box will quit and WiFi will not be reset.
3.2.2.17 Reset
[Operation Instructions]
★
At the function setting page, by touching ―
Reset
‖, a choice box will pop up, where by touching ―
OK
‖ all
user parameter settings will be reset and by touching ―
Cancel
‖ it will back to the function setting page.
[Notes]
：
● This function is allowed only when the unit has turned off.
● This function is valid for ―
Temp. timer
‖, ―
Clock timer
‖, ―
Preset mode
‖, ―
Weekly timer
‖, and ―
Weather
depend
‖.
3.2.3 User Parameter Setting
[Operation Instructions]
★
1. At the menu page, by touching ―
PARAMETER
‖, it will back to the parameter setting page, as shown
in the figure below.
Parameter Setting Page
★
2. At the menu setting page, by touching the page turning keys, it is able to switch to the page where
the desired parameter is.
★
3. After that, this setting will be saved by touching ―
OK
‖ and then the unit will run based on this setting.
While this setting will give up by touching ―
Cancel
‖.
[Notes]
：
● For parameters with different defaults under different conditions, when conditions changes, the
To Next Page
Loading...
