83
Installation and Maintenance
Service Manual
Step Procedure
4. Remove air-outlet panel
Remove 3 screws at the top part of the air-out panel,
2 screw at the lower part and screws under the screw
cover, push the air-output panel upwards slightly and
then remove the air-output panel.
5. Remove air damper
Remove 10 screws used for xing the air damper, and
then the air damper can be removed.
6. Remove top cover
Remove 7 screws on the top cover, and then pull the
top cover upwards to remove it.
Air-outlet panel
Air damper
Top cover
Screws
11. Removal Procedure
To Next Page
Loading...
