12
DC Inverter Multi VRF System II
Service Manual
CONTROL
D
1
D
2
H
1
H
2
D
1
D
2
H
1
H2
D
1
D2
H
1
H2
D1 D2
Indoor unit 1 Indoor unit 2
Indoor unit 16
Outdoor unit
Fig. 3.6 Two wired controllers control multiple indoor units simultaneously
3 Remote Controller
(1) Remote controller YAD1F
1) Button name and function introduction (outside)
No. Button name Function
1 ON/OFF Turn on or turn off the unit
2 FAN Set fan speed
3 ▲/▼ Set temperature and time
4 COOL Set cooling function
5 HEAT Set heating function
6 SWING Set swing status
7 TURBO Set turbo function
2) Button name and function introduction (inside)
No. Button name Function
1 MODE Set operation mode
2 TIMER ON Set timer on function
3 TIMER OFF Set timer off function
4 LIGHT Set light function
5 I FEEL Set I FEEL function
6 X-FAN Set X-FAN function
7 TEMP Switch temperature displaying type on the unit’s display
8 HEALTH Set health function
9 CLOCK Set clock of the system
10 SLEEP Set sleep function