Gree U-MATCH GUHD09NK3CO - Page 151

A/A DC INVERTER U-MATCH AIR CONDITIONERS MAINTENANCE
148
3. Loosen the screws
between the electric box
and side panel and motor
base.
Loosen the screws
between the electric
box and side panel
and motor base with a
screw driver.
4. Remove the electric
box sub-assembly
● Move the electric
box sub-assembly
upward from the
middle isolation plate.
5. Mount a new electric
box sub-assembly
● Assemble the new
electric box
sub-assembly to
correct position
● Use the screwdriver
to fix the electric box
sub-assembly to
middle isolation plate
and rear side plate
according to
disassembly
procedures.
6. Connect the power
cable of each component
● Connect the wires of
each component to
correct position
according to
disassembly
procedures. For
details, please refer to
the wiring diagram.