A/A DC INVERTER U-MATCH AIR CONDITIONERS CONTROL
34
4.1.2 Instruction to LCD Display
No. Description Instruction to Displaying Contents
1 Swing Swing function
2
Air
*
Air exchange function
3 Sleep Sleeping states
4 Running mode Each kind of running mode of indoor unit (auto mode)
5 Cooling Cooling mode
6 Dry Dry mode
7 Fan Fan mode
8 Heating Heating mode
9 Defrost Defrosting state
10
Gate-control
card
*
Gate control
11 Lock Lock state
12 Shield
Shielding state (buttons, temperature, on/off, mode or save is shielded by
long-distance monitoring
13 Turbo Turbo function state
14 Memory
Memory state (Indoor unit resumes original setting state after power failure and then
power recovery)
15 Twinkle Flicking when unit is on without operation of buttons
16 Save Energy-saving state
17 Temperature Ambient/setting temperature value
18
E-Heater
*
Mark that E-heater is allowed to turned on
19 Blow Blow mark
20 Timer Timer-displayed location
21 Quiet Quiet state(two types: quiet and auto quiet)
Notes: The functions with * are reserved for other models and are not applicable for the models
listed in this manual.
Table 4.1
4.2 Buttons
4.2.1 Silk Screen of Buttons
Fig. 4-2-1 Silk screen of butto
To Next Page
Loading...
