Gree U-MATCH GUHD09NK3CO - Page 173

A/A DC INVERTER U-MATCH AIR CONDITIONERS MAINTENANCE
170
14. Assemble the fan
●Assemble the axial
flow fan to correct
position and fix it to the
motor shaft in reverse
to the disassembly
procedures.
●Put the electric box
cover to correct
position and fix it onto
the electric box
according to
disassembly
procedures.
13. Connect the motor
power cable
●Connect the insert of
motor power cable to
the mainboard terminal
in reverse to the
disassembly
procedures.
14. Assemble the
electric box cover
●Assemble the electric
box cover to correct
position
● Use screwdriver to fix
the cover onto electric
box.
Removal and Installation of Electronic Expansion Valve
Remark : Before removing the compressor, make sure that there is no refrigerant inside the pipe system and that the
power has been cut off.
Step Illustration Handling Instruction
1.拆除电子膨胀阀线
圈
用手松动电子膨胀阀
线圈
2.移开电子膨胀阀线
圈
将电子膨胀阀线圈从
电子膨胀阀上去下、
移开