A/A DC INVERTER U-MATCH AIR CONDITIONERS MAINTENANCE
173
3. Loosen the screws between the
electric box and side panel and
motor base.
Loosen the screws between the
electric box and side panel and
motor base with a screw driver.
4. Remove the electric box
sub-assembly
● Move the electric box
sub-assembly upward from the
middle isolation plate.
5. Mount a new electric box
sub-assembly
● Assemble the new electric
box sub-assembly to correct
position
● Use the screwdriver to fix
the electric box sub-assembly
to middle isolation plate and
rear side plate according to
disassembly procedures.
6. Connect the power cable of
each component
● Connect the wires of each
component to correct position
according to disassembly
procedures. For details,
please refer to the wiring
diagram.
To Next Page
Loading...
