A/A DC INVERTER U-MATCH AIR CONDITIONERS CONTROL
40
4.4.5 Swing Control Function
Under on-state of unit, press Function button till the unit enters swing control function and then press
“Enter/cancel “ button to turn on “swing” control function.
During swing function, press Function button till the unit enters swing control function and then press
Enter/cancel button to cancel swing control function.
Swing control function setting is shown in Fig 4.4.5
Fig. 4.4.5
4.4.6Timer Setting
Press Timer button to set timer off of the unit. Under off-state of the unit, press Timer button to set timer on of
the unit in the same way.
Timer on setting: Under off-state of the unit without timer setting, if Timer button is pressed, LCD will display xx.
Hour, with ON blinking. In this case, press▲ or ▼ button to adjust timer on and then press Timer to confirm. If Mode
button is pressed before pressing Timer button to confirm, timer mode will be switched to timer off setting mode. In
this case, LCD displays xx. Hour, with OFF blinking. In this case, press▲ or ▼ button to adjust timer off and then
press Timer to confirm. When LCD displays xx. Hour On Off, xx. Hour means time of timer on, but time of timer off
won’t be displayed.
Timer off setting: Under on-state of the unit without timer setting, if Timer button is pressed, LCD will display xx.
Hour, with OFF blinking. In this case, press▲ or ▼ button to adjust timer on and then press Timer to confirm. If
Mode button is pressed before pressing Timer button to confirm, timer mode will be switched to timer on setting
mode. In this case, LCD displays xx. Hour, with ON blinking. In this case, press▲ or ▼ button to adjust timer on and
then press Timer button to confirm. When LCD displays xx. Hour On Off, xx. Hour means time of timer off, but time
of timer on won’t be displayed.
Cancel timer: After setting of timer, if Timer button is pressed, LCD won’t display xx. Hour so that timer
setting is canceled.
Timer off setting under on-state of the unit is shown as Fig.4.4.6
To Next Page
Loading...
