DC INVERTER U-MATCH AIR CONDITIONERS CONTROL
54
NO. Name Function description
1 ENTER button Press the button to let setting validate.
2 Increasing button
Press “▲” and selected the unit or a certain day in one week or specific value.
Press “▲” can set week part of time.
3 Decreasing button
Press “
” and selected the unit or a certain day in one week or specific value.
Press “
” can set week part of time.
4
CANCEL/DELETE
button
short-press “cancel/delete” to back to default page or last process, long-press
“cancel/delete” to cancel timer of a certain time period in a certain day.
5
SINGLLE/GROUP
button
short-press “single/group” to enter single control setting. “SINGLE” displayed.
long-press “single/group” to enter group control setting. “GROUP” displayed
6
TIMER/TIME
button
Short-press “timer/time” to enter timer setting.
Long-press “timer/time” under default page can begin time setting.
7 On/off button Press the button to set start or close the unit.
8 LCD display Display unit information.
5.2.3 Display View
NO. Name Function description
1 Unit’s no. displays Display unit’s numbers
2 Group control displays when group controls, it will display
3 Single control displays when single unit controls, it will display
4 Timer time in week displays Display time in week
5 Timer displays Display time
6 timer state displays
“on”: when set unit on, “on” will display;
“off”: when set unit off, “off” will display;
7 timer on time displays Display starts time
8 on control displays When set unit or group on, it will display,
9 off control displays When set unit or group off, it will display,
10 present time in week display Display present time of week.
11 present time in Hr:Min displays Display time of hour and minute now
12 timer off time displays Display over time
13 timer period displays Set to different time segment
Note:
Please read corresponding manual of weekly timer controller to be familiar with it.
To Next Page
Loading...
