A/A DC INVERTER U-MATCH AIR CONDITIONERS INSTALLATION
72
1-2-2)
Adjust the height by turning the nut with a spanner. Insert the spanner from the hanger bracket opening. (Refer
to Figure 1-2-5)
Hanger bracket Figure 1-2-1 Figure 1-2-2
Figure 1-2-3 Hanger bracket Figure 1-2-4
In case of hanging:
It is possible to install using inward facing hanger bracket by not removing the brackets from the indoor unit.
(Refer to Figure 1-2-6) Be sure to use only the specified accessories and parts for installation work.
Figure 1-2-5 Figure 1-2-6
BOLT POSITION
INNARD
To Next Page
Loading...
