Gree UM600PH/A-M - Software Installation; Installation Requirements; Computer Configuration; Real-Time Control

GREE Duct type Ducted Type Split Air-Conditioner Units
20
can acquire the operating status of the entire system conveniently and straightforwardly.
(3) Real-time control
Air conditioner’s operating time and requirements may be different based on areas and functions.
User can set units’ parameters on computer according to actual needs, such as the on/off, temperature,
fan speed, mode, etc. Meanwhile, the software can also set or view the function parameters of outdoor
units, gateway and other equipment. In this way, the mangement of central air conditioners is realized.
(4) Replay history
Software can replay and save the historical monitoring information in the data base. The replay
speed can be selected and the information will be shown in text or curve. This function has greatly saved
the time to track problem cause and resolved the difficulty of problem reproduction.
(5) Applicable to multiple series, models and users
Gree Commissioning Tool Kits is applicable to air conditioning system that comsists of multiple
series and models. Later, it will be developed to cover all series of Gree central air conditioners, such as
multi VRF, centrifugal chiller, screw type chiller, ground source heat pump units, modular units, fan coiled
units, close control units, etc. It can be used by system and controller designers to develop and monitor
units, or used for maintenance and commissioning.
(6) Other functions
For the convenience of users, the software has added functions like connection guide, printing
screen, opening database folder, rebuilding database, changing database saving path, etc.
3.4.1 Software Installation
3.4.1.1 Installation Requirements
(1) Computer Configuration
Memory
1 GB at least
2 GB or above is preferred
Hard Disc 10 GB available
CPU
Core 2 or higher
1 GHz at least
2 GHz or above is preferred
Operation System
Windows Server 2003 SP3 or higher
Windows XP SP3 or higher
Windows Vista
Windows 7
(2) CD Playing
Make sure you have administrator access to the computer and there is a CD-ROM in the computer.
Put the CD into the CD-ROM. If it’s automically running, then the following display will be shown. Or
double-click the file “Launcher.exe”.