Gree VERSATI III Series - Indoor Unit Installation Guide; Indoor Unit Location Selection; Indoor Unit Space and Mounting

Air-to-water Heat Pump Split Versati
19
SPLIT TYPE
(6) Note:When release and refix the screw of the clasper,should use your hand to support the panal.And
then,after connected power cable,please ensure using the elastic trip of accessory to tighten with the pipe.
7. Installation of Indoor Unit
7.1 Select installation location of indoor unit
(1) Avoid direct sunshine.
(2) 
conditioner unit.
(3) Drainage pipe is easy to connect out.
(4) Indoor and outdoor connection pipes are easy to go outdoors.
(5) 
leak.
(6) Do not install at a place subject to corrosive gas, severe dust, salty fog, smoke or heavy moisture.
7.2 Space requirements for installation
＞1300
300
＞600
Service Space