79
Installation and Maintenance
Service Manual
Step Procedure
10.Remove liquid valve and gas valve
Unsolder the welding joint connecting the valve with
capillary and condenser; unsolder the welding joint
connecting the gas valve and air-return pipe;
remove the 2 screws xing the gas valve to remove
the gas valve.
Unsolder the welding joint connecting the liquid
valve and Y-shaped pipe; remove the 2 screws
xing the liquid valve to remove the liquid valve.
Note:
Before unsoldering the welding joint, wrap the gas
valve with a wet cloth completely to avoid damage
to the valve caused by high temperature.
11.Remove compressor
Remove the 3 footing screws of the compressor
and remove the compressor.
Remove the screws xing valve support and then
remove the valve support.
liquid valve
gas valve
compressor
valve support
11. Removal Procedure
To Next Page
Loading...
