81
Installation and Maintenance
Service Manual
Step Procedure
3.Remove grille and protective grille and front panel
Remove connection screws between the front grille and
the front panel. Then remove the front grille.
Remove connection screws connecting the front panel
with the chassis and the motor support, and then
remove the front panel.
Remove the screws fixing protective grille and then
remove the protective grille.
4.Remove right side plate and left side plate
Remove the screws xing right side plate and left side
plate and then remove them.
5.Remove axial ow blade
Remove the nut xing the blade and then remove the
axial ow blade.
Grille
Panel
Protective
grille
Left side plate
Axial ow blade
Right side plate
11. Removal Procedure
To Next Page
Loading...
