82
Installation and Maintenance
Service Manual
Step Procedure
6. Remove motor and motor support
Remove the screws xing motor and then remove the
motor.
Remove the screws fixing motor support and then
remove the motor support.
7. Remove electric box assy
Remove the screws xing electric box assy; cut off the
tieline; pull out each wiring terminal; lift the electric box
assy upwards to remove it.
Note:
When pulling out the wiring terminal, pay attention to
loose the clasp and don’t pull it so hard.
8. Remove clapboard
Remove the screws xing clapboard and then remove
the clapboard.
Motor
Motor support
Electric box assy
Clapboard
11. Removal Procedure
To Next Page
Loading...
