85
Installation and Maintenance
Service Manual
Step Procedure
Remove the screws connecting the outer case with
motor support, isolation plate and chassis; lift the outer
case upwards; loosen the clasps of outer case with
right side plate and left side plate, and then remove the
outer case.
3. Remove right&left side plate
a
Remove the screws connecting the right side plate with
electric box assy, valve support, chassis and condenser
side plate, and then remove the right side plate.
b
Remove the screws connecting the left side plate with
chassis, and then remove the left side plate.
Outer case
Right side plate
Left side plate
11. Removal Procedure
To Next Page
Loading...
