86
Installation and Maintenance
Service Manual
Step Procedure
4. Remove axial ow blade
a
Remove the nut xing axial ow blade and then remove
the blade.
b
Remove the 6 screws xing the motor and then remove
the motor.
Remove the 2 screws connecting the motor support
and chassis, and then loosen the stopper to remove the
motor support.
5. Remove electric box
Remove the screws fixing the electric box sub-assy;
loosen the wire bundle; pull out the wiring terminals and
then pull the electric box upwards to remove it.
Axial ow fan
Motor support
Electric box
Fan motor
11. Removal Procedure
To Next Page
Loading...
