Gree XE70-33/H

Wired Controller XE70-33/H
6
4.2 Instruction for Buttons
Table 4.1 Instruction for Buttons
No.
Name
Function
1 Fan
Switch fan speed: Auto, Low, Med. Low, Medium,Med. High,
and High
2 Left
Turn page
Move the cursor
Set and view parameters
4 Right
3 Up
Set the operating temperature of indoor unit
Move the cursor
Set and view parameters
8 Down
5 ON/OFF/Return Turn on/off the unit and return to the previous page
6 Mode
Switch the operating mode: Auto, Cool, Dry, Fan, Heat, Floor,
3D Heat, etc.
7 Menu/OK Select mode and confirm parameters
9 Swing/Control
Set the swing status of air conditioner or control mode of
ERV+DX Coil system
NOTES:
① When the button operation is invalid, the beeper beeps for twice to prompt.
② If there is no operation in wired controller for consecutive 20 seconds, the
backlight turns off and returns to the homepage.