Gree XE70-33/H

Wired Controller XE70-33/H
52
③ Turn off the independent swing function can resume to the original setting of
up and down swing.
④ Only the wired controller connects to the unit with independent swing function
can the wired controller set the independent swing function.
⑤ The above instructions of the independent swing function are only applicable
to the unit with independent swing function with four air outlets. When the
wired controller connects to the unit with independent swing function with two
air outlets, the setting and display of “Air Outlet 3” and “Air Outlet 4” will be
disable, and “Air Outlet 1” and “Air Outlet 2” can not be set as closed status.
Besides, the position of up and down swing in homepage will display the
independent swing icon “
” to instead.
8 Operational Instructions of ERV+DX Coil Unit
If one wired controller connects with IDU of multi VRF unit and ERV+DX Coil
system simultaneously, click “ ” or “ ” button in the homepage can switch the control
interfaces of IDU of multi VRF unit and ERV+DX Coil system.
8.1 ON/OFF
Press “ ” button in the homepage to turn on the ERV+DX Coil unit.
Press “
” button again to stop the operation of the ERV+DX Coil unit.
Interface for turning on and turning off the unit please see Fig. 8.1 and Fig. 8.2.