Gree XE70-33/H

Wired Controller XE70-33/H
7
5 Instructions for Status Column
Table 5.1 Instruction for Status Column of AC
Icon
Name
Instruction
Master
Display when the current indoor unit connected by the wired
controller is master indoor unit (the icon will not be displayed
when the wired controller connects to heat recovery unit)
Group control
Display when one wired controller controls multiple indoor units at
the same time
Slave wired
controller
It means the current wired controller is a slave wired controller
(address of wired controller is 02)
Shielding It means shielding status
Card pulling The gate control card is pulled out
Lock Lock status
Invalid operation Display when the operation is invalid
Error Display when error occurs
Memory
Memory status (when the unit is re-energized after power failure,
the indoor unit will resume to the setting status)