Wired Controller XE70-33/H
42
7.6 Setting of Functions
Under menu page,select “Func” to enter into functional setting page, as shown
below.
Switch the option via “
” or “ ” button, press “ ” button can turn on or turn
off corresponding function. If the left of certain function displays “ ”, it means the
function is turned on, if it displays “
”, it means the function is turned off.
When the option (Quiet, Air, Clean, Save) with “>” is selected, press “
” button
will enter into the setting interface of corresponding function.
NOTES:
① If the function under certain circomstances is invalid, it will display gray, press
“
” or “ ” button will skip over this function.
② After lock function is activated, it will automatically return to homepage, and
any button operation in homepage become invalid, only operate according to
the prompts can unlock the function.
To Next Page
Loading...
