Wired Controller XE70-33/H
21
After activating the function of viewing all the IDU project No., all the IDU, wired
controller (wired controller will display the IDU project No. circularly in every 3
seconds, and will display according to the project No. from small to large) in the
network will display its project No.
After activating the function of viewing all IDU project No., user can enter into this
page to turn off the function, or press “
” button in anyone of the wired controller
of the network to cancel the display of all IDU project No.
(3) Parameter View
In the project view page, select “Parameter View” to enter into the page, as
shown below, user can view the parameters as shown in table 6.1 and table 6.2.
To Next Page
Loading...
