Wired Controller XE70-33/H
32
Item Settable range Default Remarks
Temp of
Absence
5~10
℃
8
℃
—
Resume after
inserting card
00:No
01:Yes
01:Yes
When it is set as 00, it will keep the
status after inserting the gate control
card, that is, if it is OFF status when
pulling out the card, when inserting the
card, it is still OFF status.
Cold air
prevention time
setting of
indoor unit*
180s
300s
420s
600s
180s
Cold air prevention time is the max
waiting time from the time turning on
the heating mode to the time blowing
out the hot wind. The actual waiting
time is related to the outdoor ambient
temperature. If there is cold air after
turning on the heating mode in the
actual operation, please consult the
professional person to adjust this
NOTES:
① Except for the above parameters, setting interface for other parameter can
only be accessed by inputting password.
② Under parameter setting status, signal of remote controller is invalid.
To Next Page
Loading...
