Caution:
If strap is fed more than 6cm ahead the rollers, it could make Auto Strap
Feeding failed.
7.
Press Start Switch. Machine will complete the Auto Strap Feeding in 5 sec. and
have the strap feeding to the sealing point.
Caution!
In the process of Auto Strap Feeding, only the Start Switch is functional.
Neither Foot bar switch nor foot pedal switch will function.
Caution!
The cut edge of the strap must be free from burrs to avoid failure in Auto Strap
Feeding.
C
Fig. d.
Fig. e.
B
To Next Page
Loading...