5.6
Adjustment on Tensioning Rollers for High Tension
The machine is already well set for proper pressure for high tension. However, according
to different strap characteristics (such as smoother surface or different thickness), some
adjustments on pressure for high tension might be necessary.
When insufficient strapping tension occurs even the Soft-High tension switch is on “high”
position and it is a result of pressure for high tension, please turn Nut D clockwise. This
can solve the problem of insufficient strapping tension at high tension and strap slipping
between A & B due to this.
Note:
When the pressure for high tension is set too high, the tension for strapping would get
lower.
B
To Next Page
Loading...