Greenlee UT10 Ultra Tugger User Manual

INSTRUCTION MANUAL
Read and understand all of the instructions and
safety information in this manual before operating
or servicing this tool.
Register this product at www.greenlee.com
52059725 REV 2 © 2011 Greenlee Textron Inc. 12/11
UT10 Ultra Tugger
®
Cable Puller and
Pulling Packages
Serial Code ANB
Español ............... 37
Français .............. 73

Greenlee UT10 Ultra Tugger Specifications

General

Type	Cable Puller
Power Source	Electric
Amperage	15 A
Pulling Capacity	10, 000 lbs
Voltage	120V
Model	UT10 Ultra Tugger

Summary

Introduction and Safety

Product Description and Purpose

Provides a general overview of the UT10 Ultra Tugger and the manual's intent.

Important Safety Information

Contains critical warnings and hazard information for safe operation and servicing of the tool.

Grounding Instructions

Explains the necessity and procedure for properly grounding the tool to prevent electric shock.

Product Details and Principles

Identification and Specifications

Identifies components and lists technical specifications for the UT10 Cable Puller.

Cable Pulling Glossary

Defines essential terms and concepts related to cable pulling operations.

Cable Pulling Principles

Details systems, theory, forces, tailing, and planning for cable pulls.

Boom Operation and Setups

Boom Operation Basics

Covers raising, lowering, pivoting, and assembling the boom components.

Boom Setup Configurations

Details various boom configurations for different pulling directions.

Transporting and Alternative Setups

Instructions for moving the unit and alternative mounting configurations.

Operation, Maintenance, and Parts

Operating and Removing Cable

Step-by-step guide for operating the puller and removing cable.

Maintenance Procedures

Covers general, specific, component, and gearbox maintenance.

Illustrations and Parts Lists

Provides visual breakdowns and lists of parts for the main unit, gearmotor, and carriage.