GreenWorks 25322 - User Manual

Questions and Answers

A
Aaron BrownAug 6, 2025
What to do if my GreenWorks 25322 Lawn Mower does not start?
- J
  Jeffrey BrownAug 6, 2025
  If your GreenWorks Lawn Mower doesn't start, several factors could be at play. First, grass might be jammed at the blade, in which case you should remove the battery and check under the deck for any obstructions. Another reason could be that the battery isn't properly connected to the motor; ensure that the connection between the motor connector and the battery is secure. Also, make sure the key is inserted. If these steps don't resolve the issue, the battery may need to be replaced; you can call the toll-free helpline at 1-888-909-6757 or replace the battery.
J
Jeffrey McfarlandAug 12, 2025
What to do if GreenWorks Lawn Mower does not mulch properly?
- R
  Robert HarrisAug 12, 2025
  If your GreenWorks Lawn Mower isn't mulching properly, wet grass clippings might be sticking to the underside of the deck; wait until the grass dries before mowing. Also, the mulching plug might be missing, so install it.
T
Tammy TaylorAug 18, 2025
How to fix GreenWorks Lawn Mower cutting grass unevenly?
- B
  Brandy IngramAug 18, 2025
  If your GreenWorks Lawn Mower cuts the grass unevenly, the lawn might be rough or uneven; check the mowing area. Additionally, the cutting height might not be set properly, so move the wheels to a higher setting.
K
Kimberly MorrisonAug 25, 2025
Why is my GreenWorks 25322 so hard to push?
- J
  Jacqueline BondAug 26, 2025
  If your GreenWorks Lawn Mower is hard to push, it could be because the grass is too tall, or the cutting height is too low; try raising the cutting height. Also, the rear of the mower housing and the blade might be dragging in thick grass, so empty the grass clippings from the grass catcher bag.
N
Nicole TateAug 30, 2025
Why is my GreenWorks 25322 Lawn Mower excessively noisy and vibrates?
- T
  Tina CollinsAug 31, 2025
  If your GreenWorks Lawn Mower is excessively noisy and vibrates, stop the motor and inspect for damage, as the motor shaft might be bent. Also, the blade might be unbalanced, so repair it before restarting. If the vibration continues, call the toll-free helpline at 1-888-909-6757.