GreenWorks 82T16 - Operation; Controls Overview; Start the Machine; Stop the Machine

8 OPERATION
IMPORTANT
Before you operate the machine, read and understand
the safety regulations and the operation instructions.
WARNING
Be careful when you operate the machine.
8.1 CONTROLS
8.1.1 ON/OFF BUTTON
Push this button to connect and disconnect the
electrical circuit of the machine.
Green light on (G): the electrical circuit of the machine is
on (ON). The machine prepares to operate.
NOTE
If you do not use the machine for more than 30 s, the
machine stops.
Lights off: the electrical circuit is off (OFF).
IMPORTANT
Do not keep your finger on the button when you move
the machine to prevent accidental start.
8.1.2 REVERSE BUTTON
1. If grass winds around the trimmer head or blade,
prush the reverse button.
2. Start the machine again.
8.1.3 LED INDICATION
1. 4 green lights are on when you start the machine.
2. Push the speed button forward to adjust the speed.
8.2 START THE MACHINE
1. Push the on/off button (6).
2. Push the lock-out button (5) rearward.
3. Pull the trigger (3).
8.3 STOP THE MACHINE
1. Release the trigger.
2. Push the on/off button again to turn the machine off.
8
7
6
5
G
3
8.4 OPERATION TIPS
WARNING
Keep clearance between the body and the machine.
WARNING
Do not operate the machine without guard in place.
Do these tips when you use the machine
• Keep the machine connected to the correctly worn
harness.
• Keep a firm hold with the two hands on the machine
while you operate the machine.
• Cut tall grass from the top down.
If grass winds around the trimmer head:
• Remove the battery pack.
• Remove the grass.
6
English
EN