No load speed 5000 / 6000 (±10%)
RPM
Cutting line diameter 0.095" / 0.080" (2.4 mm /
2.0 mm)
Cutting path diameter 14 in. /16 in. (35.6 cm /
40.6 cm)
Feed Type Bump Feed
Weight (without battery
pack)
7.9 lbs (3.6 kg)
Battery model BAB727/2901302 and
other BAB series
Charger model GCH8020/GCH8040 and
other CAB series
The recommended ambient temperature range:
Item Temperature
String trimmer storage
temperature range
32°F (0°C) - 113°F
(45°C)
String trimmer operation
temperature range
32°F (0°C) - 113°F
(45°C)
Battery charging temper-
ature range
39°F (4°C) - 104°F
(40°C)
Charger operation tem-
perature range
39°F (4°C) - 104°F
(40°C)
Battery storage tempera-
ture range
32°F (0°C) - 113°F
(45°C)
Battery discharging tem-
perature range
32°F (0°C) - 113°F
(45°C)
13 TROUBLESHOOTING
Problem Possible
Cause
Solution
The ma-
chine
does not
start
when you
push the
trigger.
No electrical
contact be-
tween the ma-
chine and the
battery pack.
1. Remove battery
pack.
2. Check contact and
install the battery
pack again.
The battery
pack is deple-
ted.
Charge the battery
pack.
The lock-out
button and trig-
ger are not
pushed at the
same time.
1. Pull the lock-out
button and hold it.
2. Pull the trigger to
start the machine.
13
English
EN
To Next Page
Loading...
