Greyline Instruments DFM 5.0 - Units;Mode

UNITS/MODE
From
>Mode press the Æ and then the Ç or È to select Flow or
Velocity. Flow mode displays the flow rate in engineering units (e.g.
gpm, litres/sec, etc.) Press the ü to store your selection then the È to the
next menu item and Æ to enter.
From
>Linear press the Æ key and then the Ç or È to select your units
of measurement. Press the ü to store your selection.
Press the È key to move the
> symbol to each subsequent menu item and
the ü to save your selections.
Note: the volume selection "bbl" denotes U.S. oil barrel.
Press Å or ü to return to the Menu Selections screen.
Page 10
DFM 5.0 Doppler Flow Meter
--Units/Mode--------
>Mode Flow
Linear in
Volume USG
Time min
--Units/Mode--------
Mode Flow
>Linear i
ft
m
mm
n
--Units/Mode--------
>Volume US
ft3
bbl
L
m3
IMG
IG
USMG
G
--Units/Mode--------
Mode Flow
Linear in
Volume USG
>Time se
day
hr
min
c