GridConnect NET485 - Exit Configuration Mode

Device Installer
3-30 NET485 User Guide
CPU Performance
0 (Regular)
Disable Monitor Mode @ bootup
No
RS485 tx enable
active low
HTTP Port Number
(1-65535)
80
SMTP Port Number
(1-65535)
25
MTU Size (512 – 1400)
0 (resulting in an operational
value of 1400)
TCP Re-transmission Timeout
(500-4000)
500 (ms)
Alternate MAC
Disabled ( for OEM use only)
Ethernet Connection Type
0 (auto-negotiate)
Security Settings Defaults
Disable SNMP
No
SNMP community name
public
Disable Telnet setup
No
Disable TFTP Firmware Update
No
Disable Port 77FEh
No
Disable Web Server
No
Disable Web Setup
No
Disable ECHO ports
Yes
Enable Encryption
No
Enable Enhanced Password
No
Disable Port 77F0h
No
Email Settings
Priority
L
Min. notification interval
1 (second)
All other parameters
0 (e.g., email notification and
triggers are disabled)
Exit Configuration Mode
Select 8 to exit the configuration mode without saving any changes or rebooting.
Select 9 to save all changes and reboot the device. All values are stored in nonvolatile memory.