Grifco DRIVE User Manual

Chamberlain Australia Pty Ltd
Unit 1, 75 Epping Rd
North Ryde NSW 2113
Ph: 1800 GRIFCO
www.grifco.com.au
Ref: D-M-DDO-001-D
Installation and User Manual for D-Drive Chain Drive Door Operator
This manual should be read in conjunction with Installation Manual
D-Drive Wall Controller manual (PART 2 OF 2)
Chain Drive Operator
INSTALLATION MANUAL
Chamberlain New Zealand Ltd
17B Arrenway Drive, Rosedale 0623
Auckland
Ph: 0800 653 667
www.grifco.co.nz
PART 1 OF 2

Grifco DRIVE Specifications

General

Manufacturer	Grifco
Category	Door Opening System
Model	DRIVE
Voltage	230V AC
Operating Temperature	-20°C to +50°C
Opening Speed	0.3m/s
Closing Speed	0.3m/s

Summary

Safety Instructions

WARNING Mechanical

Alerts to potential serious injury or death from mechanical hazards.

WARNING Electrical

Alerts to potential serious injury or death from electrical hazards.

CAUTION

Introduction

Parts for Installation Checklist

Lists all necessary parts required for the installation of the operator.

Installation

Mounting Platform

Details the process and requirements for installing the mounting platform for the operator.

Brake Bearing

Explains the installation procedure for the safety brake and bearing assembly.

Safety Brake and Operator Pairing

Operator

Manual Chain Engaging Cord

Installation of the Brake Release Cord

Operation

Hand Chain

Explains how to engage and disengage the hand chain for manual door operation.

Operation of Brake Release Cord

How to Reset the Safety Brake

Provides step-by-step instructions on how to reset the safety brake.

Specification

Operator

Safety Brake