Grillo FD 450 - Introduction; Description and Intended Use

3
1. INTRODUCTION
Dear Customer,
we thank you for the trust and preference you have placed in our Grillo
FD450andwearecondentthattheuseofyournewmachinewillfully
meet your requirements.
For optimal use and maintenance over time, please carefully read and
follow the instructions in this booklet; this will enable you to obtain the
best results and safeguard your purchase.
Please keep this manual, which should always accompany the machine
as an integral part of it.
Readingtheoperator’smanualisveryimportant.
2. DESCRIPTIONANDINTENDEDUSE
The Grillo FD 450 is a ride-on mower designed for grass cutting and
collection and foliage collection.
Any other use is considered as improper use.
This machine must only be used by personnel who are familiar with
its specic features, safety regulations and all that concerns accident
prevention.
Any improper use of the machine will invalidate the warranty and relieve
the manufacturer of all responsibility; any risk resulting from improper use
will be borne by the user.
Maintenanceandrepairofthemachinemustbecarriedoutbyqualied
personnel following the procedures specied by the manufacturer.
Any alteration or tampering will invalidate the warranty and relieve the
manufacturer of all responsibility for damage or accidents.
Markings in the Manual
This manual contains warnings highlighted in bold and marked with these
symbols:
CAUTION
This symbol and the text that follows it contain information that
highlights possible, even very serious, risks to the safety of the
operatorandanyoneworkingonthemachineiftheydonotconsider
thewritteninformationandprocedures.
IMPORTANT
This heading informs the operator of actions or conditions that
coulddamagethemachine.
Read these messages carefully to avoid injury or damage to the machine.
The retailer is responsible for inspecting the machine before delivery and
for completing the inspection form “PRE-DELIVERY INSPECTION”.
On this occasion the retailer will provide the customer with all the
information necessary to use the machine.
The customer will receive the machine in optimum condition.