Grillo FD 450 - Storage and Prolonged Inactivity; Towing The Machine With The Engine Off; Technical Assistance Service; Assistance

33
20. STORAGEANDPROLONGEDINACTIVITY
Store the machine in a dry place, protected from the elements.
Clean the machine from soil and grass residues and if possible cover it
with a tarpaulin when the engine is cold. If the machine is not to be used
for an extended period of time (more than 1 month), proceed as follows:
• Disconnect the positive (red) battery cable and follow the
instructions in the engine instruction booklet;
• Also lubricate all the joints according to the indicated points.
21. TOWINGTHEMACHINEWITHTHEENGINEOFF
To move the machine with the engine switched off, the bypass valve of
the hydrostatic transmission must be actuated by pushing the appropriate
rodtowardstheinsideofthemachine(g.73/A).
CAUTION:inthiswaytheeffectivenessofthebrakingdevice
is invalidated.
A
Fig. 73
22. TECHNICALASSISTANCESERVICE
22.1 ASSISTANCE
This manual provides instructions for the use of the machine and for its
routine maintenance.
Forextraordinarymaintenance,foralloperationsrequiringtechnical
skillsandexpertise,pleasecontactyourauthorisedGrillodealer.
22.2 IDENTIFICATIONDATA
If it is necessary to contact an authorised service centre, for maintenance
information, always provide:
machinemodel ........................................................................................
serial number ...........................................................................................
The machine’s serial number plate is located on the front of the frame
undertheseat(g.74).
Machine model
Serial number
Fig. 74
Weadvisethecustomertonotedownthisadditionalinformationin
thespacesbelow.Itmaybeusefulfortheservicedepartment.
PURCHASE DATE ....................................................................................
GRILLO DEALER ......................................................................................
22.3 SPAREPARTS
It is recommended to use only genuine spare parts to ensure product
safety and durability.
22.4 WARRANTY
Thewarranty isprovided inthe mannerand withinthe limitsspecied
by current law. The retailer must hand over the machine’s warranty
certicatetotheendcustomer,printingacopyoftheregistrationfromthe
Grillo website. Transport, servicing and wear parts remain at customer’s
expense.Any tamperingorimproperusenotspecicallyauthorisedby
Grillo will invalidate the warranty.
Theenginefollowstheconditionsspeciedbyitsmanufacturer.
22.5 HOWTOORDERSPAREPARTS
Contact our authorised centres.
Please indicate the serial number of the machine and the code of the
component to be replaced.
It is possible to identify the part number by consulting the Grillo website:
the spare parts tables for the machine will be available by entering the
serial number.