Grizzly G0651 User Manual



The information contained herein is deemed accurate as of 9/14/2010 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 3Model G0652
Motors:
Main
Type.................................................................................................................. TEFC Capacitor Start Induction
Horsepower.................................................................................................................................................5 HP
Voltage.............................................................................................................................................. 220V/440V
Prewired......................................................................................................................................................220V
Phase.........................................................................................................................................................Three
Amps..........................................................................................................................................................12/6A
Speed.................................................................................................................................................3450 RPM
Cycle..........................................................................................................................................................60 Hz
Number Of Speeds........................................................................................................................................... 1
Power Transfer ................................................................................................................................... Belt Drive
Bearings........................................................................................................ Sealed & Permanently Lubricated
Main Specifications:
Blade Information
Maximum Blade Diameter.......................................................................................................................... 10 in.
Riving Knife/Spreader Thickness..............................................................................................0.09 in. (2.3mm)
Required Blade Body Thickness............................................................................ 0.074-0.082 in. (1.9-2.1mm)
Required Blade Kerf Thickness.............................................................................. 0.114-0.122 in. (2.9-3.1mm)
Maximum Width Of Dado.......................................................................................................................... 3/4 in.
Blade Tilt....................................................................................................................................... Left 0-45 deg.
Arbor Size..................................................................................................................................................5/8 in.
Arbor Speed....................................................................................................................................... 4000 RPM
Arbor Bearings........................................................................................... Sealed and Permenantly Lubricated
Cutting Capacities
Maximum Depth Of Cut At 90 Degrees................................................................................................3-3/16 in.
Maximum Depth Of Cut At 45 Degrees................................................................................................2-3/16 in.
Maximum Rip To Right Of Blade-Standard................................................................................................ 52 in.
Maximum Rip To Left Of Blade.................................................................................................................. 18 in.
Table Information
Floor To Table Height.......................................................................................................................... 34-7/8 in.
Table Size Width.................................................................................................................................. 21-1/4 in.
Table Size Depth........................................................................................................................................27 in.
Table Size Thickness............................................................................................................................. 1-1/2 in.
Table Size With Extension Wings Width.............................................................................................. 75-3/4 in.
Table Size With Extension Wings Depth....................................................................................................27 in.
Table Size With Extension Wings Thickness......................................................................................... 1-1/2 in.
Distance Front Of Table To Center Of Blade....................................................................................... 14-7/8 in.
Distance Front Of Table to Blade At Maximum Cut........................................................................... 10-5/16 in.
Extension Table Size Width................................................................................................................. 42-1/2 in.
Extension Table Size Depth....................................................................................................................... 27 in.
Extension Table Size Thickness............................................................................................................... 3/4 in.
Fence Information
Fence Type...................................................................Single Lever, Front Locking, Aluminum Extruded Body
Fence Size Length............................................................................................................................... 40-1/4 in.
Fence Size Width................................................................................................................................... 4-1/8 in.
Fence Size Height..................................................................................................................................2-1/2 in.
Fence Rail Type.......................................................................................................................... Square Tubing
Fence Rail Length................................................................................................................................ 40-1/4 in.
Fence Rail Width....................................................................................................................................... 5/8 in.
Fence Rail Height...................................................................................................................................2-1/2 in.


Grizzly G0651 Specifications

General

Brand	Grizzly
Model	G0651
Category	Saw
Language	English