Figure
68
Page 61
Rabbet Cutting
G^e;ZcXZ
HVXg^[^X^Va
;ZcXZ
9VYd>chZgi
7aVYZ8ji"Dji
Figure 68.
Dado blades have a higher risk of kickback
than normal blades because their larger size
applies stronger forces to the workpiece.
This risk increases relative to the depth and
width of the cut. To minimize your risk of
serious personal injury, ensure that stock
is flat and straight, and make multiple light
cuts (rather than one deep cut) to achieve
the desired cutting depth.
Always use push sticks, featherboards,
push paddles and other safety accessories
whenever possible to increase safety and
control during operations which require
that the blade guard be removed from the
saw. ALWAYS replace the blade guard after
dadoing is complete.
Ldg`e^ZXZ
;ZcXZ
9VYd7aVYZ
HVXg^[^X^Va;ZcXZ
Figure 69.
4.
ON
3.
Figure 69
1.
2.
Cutting Rabbets with a Dado Blade
To Next Page
Loading...
Need help?
General
