Workpiece
Inspection
Before sanding, inspect all workpieces for the
following:
Material Type:
Foreign Objects:
• Large/Loose Knots:
• Wet or "Green" Stock:
Excessive Warping:
Minor Warping:
Sandpaper
Selection
Grit Class Usage
NOTICE
Sanding workpieces with high-resin con-
tent or with applied finishes can quickly
contaminate the sandpaper beyond the
point where it can be properly cleaned. This
will produce poor sanding results. In this
case, use a different workpiece, remove
the applied finishes, or frequently clean/
replace the sandpaper strip.
To Next Page
Loading...
Need help?
General
