Grizzly G0716 - Section 6: Maintenance; Schedule; General Cleaning; Cleaning Sandpaper

 

SECTION 6: MAINTENANCE
Always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious person-
al injury.
     


Daily Check
 
 
 
 
 
Schedule
      
      

        
       
  

General Cleaning
       



   

Figure 29
        
     

Note: Do not use grease or oil lubricants that will
attract and hold the sawdust.
Lubrication
Cleaning Sandpaper
      
      
      

    Page 28   

Figure 29.


