Grizzly G1182HW User Manual

-22- G1182 6" Series Jointers
3. If there is a gap between the bevel’s blade
and the face of the fence, turn the stop bolt
until the gap is gone.
4. Tighten jam nut. Move your fence forward,
then back against the stop. Recheck the stop
bolt.
Figure 23. Jointer fence in 45° stop position.
Jointer knives are dangerously sharp. Use
extreme caution when handling knives or
working near them. Serious personal injury
may occur.

Grizzly G1182HW Specifications

General

Brand	Grizzly
Model	G1182HW
Category	Power Tool
Language	English