Grizzly G1199 User Manual

DRILL PRESS
MODEL G1199/G1200
INSTRUCTION MANUAL
COPYRIGHT © 1990 BY GRIZZLY IMPORTS, INC. REG. #3176563
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY IMPORTS, INC.
REVISED JUNE, 1996 PRINTED IN USA
DISCONTINUED MACHINE MANUAL DISCLAIMER
THE INFORMATION IN THIS MANUAL REPRESENTS THE LAST CONFIGURATION OF THE MACHINE BEFORE IT WAS DISCONTINUED. MACHINE CON-
FIGURATIONS MAY HAVE CHANGED AS PRODUCT IMPROVEMENTS WERE INCORPORATED. IF YOU OWN AN EARLIER VERSION OF THE MACHINE,
THIS MANUAL MAY NOT EXACTLY DEPICT YOUR MACHINE . CONTACT CUSTOMER SERVICE IF YOU HAVE ANY QUESTIONS ABOUT DIFFERENCES.
PREVIOUS VERSIONS ARE NOT AVAILABLE ONLINE.

Grizzly G1199 Specifications

General

Brand	Grizzly
Model	G1199
Category	Drill
Language	English

Summary

Safety Rules For All Tools

Circuit Requirements

SECTION 2: ASSEMBLY

SECTION 3: ADJUSTMENTS

Speed Change

Guide on how to change the drill press speed using the belt system.

Spindle Adjustments

How to adjust the spindle depth for desired drilling depth.

Table Adjustments

Instructions for adjusting the table height and position.

Chuck Removal

Procedure for safely removing the drill chuck.

SECTION 4: OPERATIONS

Safety Rules

Essential safety precautions for operating the drill press.

Test Run

Drill Changes

Step-by-step guide for inserting or changing drill bits.

Drill Speed

SECTION 5: MAINTENANCE

TROUBLESHOOTING

Noisy Operation

Bit Burns or Smokes

Excessive Drill Runout or Wobble

Drill Binds in Workpiece

Workpiece Torn Loose from Hand