Grizzly G4002 Read This First

COPYRIGHT © SEPTEMBER, 2015 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#MN17636 PRINTED IN CHINA
The following changes were recently made to this machine since the owner's manual was printed:
• Spindle ON/OFF switch has been changed from a rotary switch to a micro switch.
• Spindle ON/OFF switch wiring has been revised.
• Piece Inventory has been updated.
Aside from this information, all other content in the owner's manual applies and MUST be read and under-
stood for your own safety. IMPORTANT: Keep this update with the owner's manual for future reference.
For questions or help, contact our Tech Support at (570) 546-9663 or techsupport@grizzly.com.
READ THIS FIRST
For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Model G4002/G4003
***IMPORTANT UPDATE***
For Machines Mfd. Since December, 2014
and Owner's Manual Printed April, 2014
New Spindle ON/OFF Switch
919V2
918V2
917
916
915
914
913
911
910
909
908
907V2
912
946
947
948
949
950
A
REF PART # DESCRIPTION
907V2 P4002907V2 SPINDLE ROD V2.12.14
918V2 P4002918V2 CONNECTION BRACKET V2.12.14
919V2 P4002919V2 SPINDLE ON/OFF SWITCH V2.12.14
946 P4002946 CAP SCREW M4-.7 X 6
947 P4002947 SET SCREW M6-1 X 8
948 P4002948 SPINDLE SWITCH ARM
949 P4002949 SPINDLE SWITCH BOX
950 P4002950 BUTTON HD CAP SCR M4-.7 X 45
To Electrical
Cabinet
Page 84
Revised Spindle ON/OFF Switch Wiring
Spindle Rotation Switch
C
C
NO NO
NC
NC
4
5
7
6

Grizzly G4002 Specifications

General

Brand	Grizzly
Model	G4002
Category	Lathe
Language	English